Skip to content
Afterburn EventsDJ & Wedding Sound

Tools

Event Audio and Visual Glossary

Short, plain-English definitions of the terms you'll hear from DJs, venues and AV suppliers.

Last reviewed:

Audio terms

Active speaker

A speaker with a built-in amplifier; it needs mains power and a line-level signal.

Balanced audio

A three-conductor connection that cancels interference over long cable runs — the reason XLR is used for event audio.

Clipping

Distortion when a signal exceeds what a device can handle. It sounds harsh and can damage speakers; red meter lights warn of it.

dB(A)

A sound level measurement weighted to match human hearing, used by venue limiters and noise regulations.

Feedback

The howl when a microphone picks up its own sound from a speaker and re-amplifies it.

Ohms (impedance)

Electrical resistance of a speaker. Passive speakers must be matched to an amplifier's rated impedance.

RMS power

A continuous power rating, more meaningful than 'peak' figures, though manufacturers measure differently.

Sensitivity

The sound level a speaker produces with 1 watt at 1 metre — higher means louder for the same power.

Speakon

A locking connector used for passive speaker cables.

TRS jack

A 6.35 mm (quarter-inch) connector with tip, ring and sleeve, used for balanced line or stereo signals.

XLR

A three-pin locking connector used for microphones and balanced line signals.

Lighting and video terms

DMX512

The standard digital control protocol for stage lighting fixtures.

Gobo

A stencil placed in a light to project a pattern or logo.

Haze

A fine atmospheric mist that makes light beams visible.

Lumens (ANSI)

A measure of projector brightness. ANSI lumens follow a standard test method.

Throw ratio

Projector distance divided by image width; tells you where a projector must sit.

CEEform

Industrial power connectors; blue 16A and 32A versions are common on event power.

Put the terms into practice.

Sound equipment guide