Skip to content
Afterburn EventsDJ & Wedding Sound
Active PA speaker on a pole above a subwoofer, with a DJ mixer and wired microphone on a flight case

Sound Equipment

Event Sound Equipment & Pro Audio Guide

For most UK weddings and private parties of 60–150 guests, a well-set-up 2.1 system — two active full-range speakers on stands, one active subwoofer, a DJ controller or mixer and at least one wireless microphone — is enough. Bigger rooms, outdoor marquees and live acts need more coverage, not simply more volume.

Last reviewed:

The typical 2.1 mobile DJ setup

A '2.1' system means two full-range speakers (left and right) plus one subwoofer handling the low end. It is the workhorse of mobile entertainment because it packs into an estate car, sets up in under an hour and covers a typical function room evenly.

ComponentWhat it doesTypical choice
Active tops (x2)Reproduce vocals and most of the music10", 12" or column array, on stands or pole-mounted
Active subwoofer (x1)Handles bass below roughly 100 Hz12" or 15" single sub; 18" for larger rooms
DJ controller / mixerPlays and blends music, adds mic channels2–4 channel controller or standalone unit with mic inputs
Wireless microphoneSpeeches, announcements, MC dutiesHandheld UHF, licence-free Channel 70 or licensed Channel 38
CablingBalanced XLR runs, mains extension, sparesLabelled XLR looms, cable ramps, gaffer tape

Signal flow in plain terms

Music and microphones go into the mixer, the mixer's balanced master output feeds the subwoofer, and the subwoofer's high-pass output feeds the two tops. This lets the sub take the bass load off the tops, so the whole system sounds cleaner at the same level.

Active vs passive speakers

Active (powered) speakers have amplifiers built in and are matched to their drivers by the manufacturer, which removes guesswork. Passive speakers need separate amplifiers and careful impedance matching. For mobile work, active speakers are now the norm because they are lighter to transport and quicker to set up.

Mixers, controllers and microphones

Whatever plays the music, it needs at least one dedicated microphone channel with its own EQ and gain. Wedding speeches are the moment most likely to go wrong, so choose a unit where the microphone can be controlled independently of the music.

  • Read our guide to DJ controllers and mixers for backup strategies.
  • Read our wireless microphone guide for UK frequency rules.

Power and safety

A 2.1 system usually runs from one or two standard 13A sockets, but lighting and catering often share circuits. Ask the venue which sockets are on which circuits, keep cable runs taped down or under ramps, and carry evidence of portable appliance testing — many venues ask for it.

Outdoor events

Marquees and fields need generator power. Our generator guide explains inverter generators, earthing and why audio gear dislikes a noisy supply.

Choosing the right size of system

Room size, guest numbers, ceiling height and any venue sound limiter matter more than headline wattage figures. Use the sound coverage calculator for a reference estimate, then sense-check it against the advice in our PA speakers guide.

Need a rough idea of system size for your room?

Try the coverage calculator