Skip to content
Afterburn EventsDJ & Wedding Sound
Active PA speaker on a pole above a subwoofer, with a DJ mixer and wired microphone on a flight case

Sound Equipment

Guide to Choosing PA Speakers for Weddings and Events

Column array systems suit most weddings because they spread sound evenly, look tidy in photographs and play nicely with venue limiters. Traditional 12-inch and 15-inch active speakers with a subwoofer still win where you need more output, punch for dance music, or outdoor throw.

Last reviewed:

Column arrays vs point-source speakers

Column array12" / 15" point source + sub
LookSlim, unobtrusive, photograph wellBulkier, more 'disco' appearance
CoverageWide horizontal, controlled vertical — even level front to backLouder near the speaker, drops off faster with distance
LimitersEven coverage lets you run lower peak levelsEasier to trip a limiter near the speaker
BassUsually includes a compact subScales up with larger or multiple subs
Best forCeremonies, receptions, corporate dinners up to ~150Dance-heavy parties, large rooms, outdoor events

Specifications that actually matter

Manufacturer wattage figures are measured in different ways and are a poor way to compare speakers. Sensitivity and maximum SPL tell you more.

  • Maximum SPL: the loudest clean level the speaker claims. Compare like for like (peak vs continuous).
  • Dispersion angles: wider horizontal coverage helps long, narrow rooms.
  • Frequency response: look at the low-end figure, but remember a sub handles the deep bass.
  • Weight and handles: you will lift these at midnight after a long day.
  • Onboard DSP: presets, limiters and a high-pass filter are useful.

12-inch or 15-inch tops?

With a subwoofer, a 10" or 12" top is usually the better choice: lighter, clearer vocals and easier on stands. A 15" top used without a sub gives more bass from fewer boxes, but tends to sound boomy in small rooms and is heavier to pole-mount.

Placement tips

  • Raise tops so the high-frequency driver sits above guests' heads.
  • Keep speakers in front of microphones to reduce feedback.
  • Place subs on the floor near a wall for extra low end, but away from limiter sensors.
  • Angle tops slightly inward to cover the dance floor without blasting the bar.

Buying or hiring

If you are a host rather than a DJ, hiring a complete system with delivery and setup is often better value than buying. If you are building a mobile kit, try speakers in a real room before committing. Our directory lists UK suppliers once they have been reviewed against our inclusion criteria.

Working in a venue with a noise limiter?

Read the limiter guide